-
平臺編號：bio-124170
-
國際編號：ATCC 14267
-
拉丁屬名： Mycoplasma pulmonis
-
規格：Freeze-dried
-
用途：ATCC原裝進口
-
服務費用：
加載中…… - 訂購 說明書
-
注意事項：僅用于科學研究或者工業應用等非醫療目的不可用于人類或動物的臨床診斷或治療，非藥用，非食用（產品信息以出庫為準）
肺支原體
Mycoplasma pulmonis 拉丁名
14267™統一編號
Product category:Bacteria
Strain designation:[Kon]
Type strain:模式菌種No
Isolation source:分離源Lung of rat with bronchiectasis
Geographical isolation:England; London
Product format:規格Freeze-dried
Preceptrol：No
Medium：培養基ATCC Medium 243: Mycoplasma medium
Temperature：培養溫度37°C
Atmosphere：需氧條件95% Air, 5% CO2
Handling procedure
PROPAGATION PROCEDURE:
1. Follow instructions as suggested for the culturing of
Mollicutes:
PROCEDURES FOR PROPAGATING MOLLICUTES:
a) Open the vial according to the enclosed instructions.
b) Using a Pasteur or 1.0 ml pipette, withdraw approximately 0.5 to 1.0 ml from a tube containing 5.0 ml. Rehydrate the pellet.
c) Aseptically transfer this aliquot back into the tube. Mix well.
d) Make serial dilutions by transferring 0.5 ml from the original tube to a tube containing 4.5 ml. Repeat process by transferring 0.5 ml from the second to a third tube, etc. Dilutions are important, not only for titration purposes, but also to keep culture in varying stages of growth. Many strains will die out rapidly once acid or alkaline conditions are reached. It is recommended to prepare several dilutions from the initial tube as the cryoprotectant used in the freeze?drying process often inhibits growth.
e) Use an uninoculated tube of broth to serve as a control.
f) Plates may be inoculated to check colonial morphology. You can also spot each dilution on the surface of plate (4 or more/plate) to determine the number of colony-forming units. However, not all strains do well on solid medium.
g) Incubate all tubes and plates under the recommended conditions and appropriate temperature. The time necessary for growth will vary from strain to strain. Growth on plates generally requires additional incubation.
h) Depending on the medium used, growth will be indicated by increased turbidity, a color change, or both.
2. This strain starts to show turbidity in the first few dilution tubes after 24 to 48 hours. Additional incubation is required for growth on solid agar.
3. Subsequent, fresh transfers grow more rapidly than the original culture. This strain produces good turbidity.
Handling notes
Broth tubes may be incubated aerobically, but plates should be under 5% CO2.
Colonies on #243 agar are visible without magnification.
History
Deposited as
Mycoplasma pulmonis (Sabin) Freundt
Depositors
RG Wittler
Chain of custody
ATCC <-- RG Wittler <-- E. Klieneberger-Nobel strain Kon
Type of isolate
Animal
